The Crestron® AMP-X50MP is a low-cost audio amplifier solution that is suitable for a variety of applications. It features a compact, surface-mountable design that installs virtually anywhere without requiring an equipment rack.
Compact and versatile power amplifier
2 x 25 W per channel (1 x 50 W) into 4 or 8 Ohm speakers
1 x 50 W output for Hi-Z (70 V and 100 V) speakers
Balanced, unbalanced and stereo 3.5 mm inputs with auto summing
Stereo or mono-summed operation
Remote power control
Energy saving design reduces power consumption when idle
Highly sensitive audio-sensing circuitry with high-speed wake time
Convection cooled for noiseless operation
Volume, bass and treble adjustments
Captive speaker and power connectors for secure and robust connectivity
Electronic short-circuit and overload protection
Factory installed surface mount flange brackets are removable and reversible
Quarter-Rack width for rack mounting with optional kit
60 W DC power supply with locking barrel connector and DC cable included
Amplifier Type - Standard Amplifier
Energy Star rated - Yes
Low Voltage Control - Yes
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
41 F
Mounting Width:
0.25 in
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Certifications:
UL
Impedance:
8 ohm
Number of Channels:
2
Sensitivity:
4 dB
Signal to Noise Ratio:
90 dB
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
14.60 Watt
Current Draw:
2.50 Amps
DC Voltage:
24 Volts
Standby Power:
6 Watt
Depth:
6.99 in
Height:
1.74 in
Width:
4.33 in
Product Weight:
3.24 lbs
Regulatory Compliance:
ErP (1275/2008/EC), UL 62368, UL 2043, FCC Class B commercial and residential use
Warranty (Length/Type):
Limited
Audio:
•Input Signal Types: Balanced or unbalanced analog line-level •THD+N: <0.1% at 1 kHz @ -3 dB full rated output power •Crosstalk: -75 dB at 1 kHz •Input Sensitivity: 1.23 Vrms, +4 dBu balanced; 0.316 Vrms, -10 dBV unbalanced; For 25 W @ 8 Ohms, 50 W @ 70 V/100 V •Gain: 21.5 dB @ 8 Ohms, Balanced •Protection: Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency •Wake Signal Threshold: -57 dBu (1 mV) max
Connectors:
•Speaker Output: (1) 6-pin, 5.08 mm pitch, 12 A plug with screw locking retainers; Power amplifier outputs; Wire Size: Terminals accept up to 12 AWG (3.31 mm2) •ALS OUT:(1) 3.5 mm connector, female; Unbalanced line level audio outputs; Maximum Output Level: 2.24 Vrms, +7 dBV (+9.2 dBu); Fixed audio output for assisted listening devices duplicates the summed audio input •AUDIO IN 1-2 (UNBALANCED): (2) RCA connectors, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu) •AUDIO IN 1-2 (UNBALANCED): (1) 3.5 mm connector, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu) •AUDIO IN 1-2 (BALANCED): (1) 5 pin 3.5 mm detachable terminal block; Balanced line level audio inputs; Maximum Input Level: 7.75 Vrms, +20 dBu; Input Impedance: 20k Ohms •REMOTE: (1) 2 pin 3.5 mm detachable terminal block; Connect to contact closure to place amplifier in standby mode. •G: (1) M3 with captivated internal tooth lock washer screw; Chassis ground lug
Controls & Indicators:
•PWR: (1) Bi-color white/red LED; White indicates operating power supplied; Red indicates standby mode. •FAULT: (1) Red LED; Indicates an over temperature or over current fault •SIGNAL: (1) Bi-color white/red LED; White indicates input signal presence; Red indicates input signal clipping/limiting •Hi-Z: (1) White LED; Indicates speaker output is in Hi-Z (70 V/100 V) mode •MONO/STEREO: (1) Slide switch to select STEREO, MONO; STEREO preserves channels; MONO creates a mono downmix of the input signals •HiZ/LoZ: (1) Slide switch to select LoZ (low impedance 4-8 ohms) or Hi-Z (high impedance 70 V/100 V) •VOLUME, BASS, TREBLE: (3) Rotary knobs adjust volume, bass (+/- 6 dB) and treble (+/- 6 dB) levels
Environmental:
•Humidity:10% to 90% RH (non-condensing)
Construction:
•Chassis: Metal, convection cooled (fanless) •Front Panel: Metal, black finish with polycarbonate label overlay •Mounting: Freestanding, surface mount or 1/2 width 1 RU 19 in. rack mountable; Gangable with other Crestron modular and X series products (adhesive feet and surface mounting brackets included); Ganging kit and rack mounting kit optional
AMP-2210HT
- 2x210W Commercial Power Amplifier, 4/8 ohm or High-Power 70V
AMP-2210T
- 2x210W Commercial Power Amplifier, 4/8 ohm or 70/100V
AMP-3210S
- 3x210W Commercial Power Amplifier, 4/8 ohm
AMP-3210T
- 3x210W Commercial Power Amplifier, 4/8 ohm or 70/100V
AMP-4600
- 4-channel Power Amplifier, 600W/channel
AMP-8075
- 8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V
AMP-8150
- 8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V
The Premier team has been stellar and attentive to every single need we have had and were on site during the entire construction of our home to insure first class install and service.