The DIN-4DIMFLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-4DIMFLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps[1] and 1/2 HP motors.
Override Input: An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.
DIN Rail Installation: The DIN-4DIMFLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-4DIMFLV4's front panel stays accessible while the connections are concealed.
Cresnet®: The DIN-4DIMFLV4 communicates with Crestron® control systems such as the DIN-AP2 or DIN-AP3 Automation Processors via the Cresnet control network. Use one of the unit's two Cresnet ports to daisy-chain several DIN Rail Series automation control modules.
Provides 4 channels of 0-10 Volt dimming control
Supports 120 and 220 to 240 Volt, 50/60 Hz applications
Allows switching of lighting and exhaust fans[1]
Includes an override input
Communicates using Cresnet®
Sets up via the front panel or through software
Offers programmable functionality via DIN-AP2 or DIN-AP3
Mounts on a 9M wide DIN rail
CEC Title 24 2013 Compliant
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
Height:
3.71 in
Width:
6.26 in
Product Weight:
0.57 lbs
Wattage (max capacity):
1200 Watt
Active Power:
4.20 Watt
Current Draw:
0.18 Amps
DC Voltage:
24 Volts
Warranty (Length/Type):
3 Years Limited
Certifications:
CE, UL, CEC Title 24 2013 Compliant
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm)
Environmental:
Humidity : 10% to 90% RH (non-condensing)
Heat Dissipation : 17 BTU/hr
Notes:
1.May not be compatible with some high inrush current loads.
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
120 Volts
CLX-1DIMU4-HP
- 4-channel 1-feed Universal Dimmer Module, High Power, 120V
The Premier team has been stellar and attentive to every single need we have had and were on site during the entire construction of our home to insure first class install and service.