fbpx FT2A-CBLR-BRKT-202 | Mid-row Cable Retractor Adapter Bracket for FT2-202 Series | Crestron Electronics, Inc. | Premier Group
Skip to main content
Pro AV Catalog
 
Request Quote
All Products
crestron-electronics

Mid-row Cable Retractor Adapter Bracket for FT2-202 Series

Model: FT2A-CBLR-BRKT-202

Part #: 6510692

  • Enables installation of one cable retractor in the middle module position within an FT2-202 Series FlipTopâ„¢
  • Attaches below the table to the front or rear of the FlipTop chassis
  • Provides mounting slots for one retractor and one power supply
  • Compatible with FT2-202-MECH and FT2-202-ELEC Series FlipTopsâ„¢
  • Compatible with Gravity Retractors and One-Touch Retractors (FT2A-CBLR-GR and FT2A-CBLR-1T Series respectively)
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

The FT2A-CBLR-BRKT-202 is an adapter bracket for a Crestron® FT2-202 Series FlipTop™ that enables the installation of a single cable retractor in the middle position within the FlipTop. It attaches to the front or rear of the FlipTop chassis,  and provides mounting slots for one retractor and one power supply.

FT2-202 Series FlipTops normally support the installation of cable retractors at the left and right ends of the module row. Adding the FT2A-CBLR-BRKT-202 bracket allows a retractor to be installed in the middle of the row, allowing for a total of up to three retractors across the entire row. The mid-row retractor occupies the third and fourth module slots of the row.

When installing a mid-row retractor, the bracket and retractor can attach to either the front or rear of the FlipTop chassis below the table. When installed, the mid-row retractor enclosure projects from the front or rear of the chassis perpendicular to the end-mounted retractors. The cable connector nests within the retractor module above the table at a 90° rotation relative to other connectors within the FlipTop.

  • Enables installation of one cable retractor in the middle module position within an FT2-202 Series FlipTopâ„¢
  • Attaches below the table to the front or rear of the FlipTop chassis
  • Provides mounting slots for one retractor and one power supply
  • Compatible with FT2-202-MECH and FT2-202-ELEC Series FlipTopsâ„¢
  • Compatible with Gravity Retractors and One-Touch Retractors (FT2A-CBLR-GR and FT2A-CBLR-1T Series respectively)
 
Request Quote
 

Showroom:
12345 Old Meridian St.
Carmel, IN 46032
p: (317) 580-1032