Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4-Series Control System
Model: CP4
Part #: 6510420
- 4-Series control system with 2 GB SDRAM and 8 GB flash memory
- Embedded 4-Series multicore CPU processor
- iPhone®, iPad®, and Android™ device control app support
- XPanel computer and web based control
- Modular programming architecture
Product Info
Tech Specs
Related Products
Documents
Accessories
The CP4 is a secure, high-performance control processor with a powerful 4-Series control engine. The CP4 is designed to integrate and automate technology within any modern networked home, commercial building, or government facility.
4-Series Control Engine
4-Series control systems come equipped with an upgraded multicore CPU, delivering a sizable speed and performance increase compared to all Crestron 3-Series® control processors. The improved performance allows 4-Series control systems to handle the increasing demands of an advanced automated system. Crestron 4-Series delivers a dynamic and secure control system platform capable of managing a room full of disparate technologies.
Reliable networking and IP control afford seamless integration with other systems and devices, with add-on control capability using Crestron touch screens, wireless remotes, and mobile device apps, as well as remote management through Crestron Fusion® software and the Crestron XiO Cloud™ service.
Modular Programming Architecture
The CP4 provides a modular programming architecture that allows the CP4 to run up to ten programs simultaneously. Programmers can develop and run independent, device-specific programs, enabling each program to be optimized for a specific function and allowing for changes to be made to one program without affecting the whole system.
Onboard Control Ports
Through a full complement of onboard control ports, the CP4 can be integrated with a wide variety of audio, video, lighting, motorized shades, thermostats, door locks, sensors, security systems, and other equipment.
- 4-Series control system with 2 GB SDRAM and 8 GB flash memory
- Embedded 4-Series multicore CPU processor
- iPhone®, iPad®, and Android™ device control app support
- XPanel computer and web based control
- Modular programming architecture
- Onboard IR/serial, COM, I/O, relay, Cresnet® network, and high-speed gigabit Ethernet control ports
- High-speed USB 2.0 host port and rear panel memory card slot
- Crestron Fusion® software room monitoring and scheduling support
- Crestron XiO Cloud™ service provisioning and management support
- Enterprise-class network security and authentication
- SNMP V3 remote IT management support
- Native BACnet network/IP support
- Installer setup via software, web browser, or cloud
- IPv6 ready
- Integrates with Apple® HomeKit® technology
- Rack mountable
- Rackmountable - Yes
- Systems Controlled - Audio
- Systems Controlled - Lighting
- Systems Controlled - Video
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 41 F
- Rack Units (Height): 1
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 15 Watt
- Current Draw: 2.50 Amps
- DC Voltage: 24 Volts
- Depth: 6.56 in
- Height: 1.70 in
- Width: 19 in
- Product Weight: 3.12 lbs
- Regulatory Compliance: CE, IC, FCC, UL
- Control Engine:
•Crestron® 4-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs - COMMUNICATIONS:
•Ethernet: 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1xX, SNMP, BACnet™ and IP1, IPv4 or IPv6, Active Directory® service authentication, HTTPS web server, HTTPS web browser setup and Crestron XiO Cloud™ client, SMTP email client
•Cresnet® Network: Cresnet master mode
•USB: Supports USB mass storage class devices via the rear panel USB 2.0 host port, supports computer console via the front panel USB 2.0 device port
•RS-232/422/485: For 2-way device control and monitoring, COM port supports RS-232 up to 115.2k baud with software handshaking, one port also supports RS-422 or RS-485 and hardware handshaking
•IR/Serial: Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 V) up to 115.2k baud - MEMORY:
•SDRAM: 2 GB
•Flash: 8 GB
•Memory Card: Supports SD and SDHC cards up to 32 GB
•External Storage: Supports USB mass storage devices up to 1 TB - Connectors and Card Slots:
•RELAY OUTPUT 1-8: (1) 4-pin 3.5 mm detachable terminal block; Comprises (8) normally open, isolated relays; Rated 1 A, 30 VAC/VDC; MOV arc suppression across contacts
•I/O 1-8: (1) 9-pin 3.5 mm detachable terminal block; Comprises (8) Versiport digital input/output or analog input ports (referenced to GND);Digital Input: Rated for 0-24 VDC, input impedance 20k OHMS, logic threshold >3.125 V low/0 and <1.875 V high/1;Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads; Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input impedance 21k OHMS with pull-up resistor disabled; Programmable 5 V, 2k OHMS pull-up resistor per pin
•IR - SERIAL OUTPUT 1-8: (2) 8-pin 3.5 mm detachable terminal blocks; Comprises (8) IR output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 V) up to 115.2k baud IRP2 IR emitters sold separately
•COM 1: (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232/422/485 port; Up to 115.2k baud; hardware and software handshaking support
•COM 2-3: (2) 3-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 ports; Up to 115.2k baud; software handshaking support
•MEMORY: (1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for storage of log files
•USB: (1) USB Type A connector, female; USB 2.0 port for storage devices
•LAN: (1) 8-pin RJ45 connector, female; 100/1000Base-TX Ethernet port
•NET: (1) 4-pin 3.5 mm detachable terminal block; Cresnet master port; Outputs power to Cresnet devices only if the included power pack is connected to the 24 VDC power input jack; Alternately functions as a Cresnet power input to power the unit from a Cresnet power supply
•24VDC 2.0A: (1) 2.1 x 5.5 mm DC power connector; 24 VDC power input; PW-2420RU power pack included; Passes through to the NET port to power Cresnet devices
•G: (1) 6-32 screw; Chassis ground lug
•COMPUTER (front): (1) USB Type B connector, female; USB 2.0 computer console port; For setup only - Controls and Indicators:
•PWR: (1) Green LED, indicates operating power is supplied from the power pack or Cresnet power supply
•NET: (1) Amber LED, indicates communication with Cresnet devices
•MSG: (1) Red LED, indicates control processor has generated an error message
•HW-R: (1) Recessed push button for hardware reset
•SW-R: (1) Recessed push button for software reset
•LAN (rear): (1) Bicolor green/amber and (1) Amber LEDs; Green/amber LED indicates Ethernet link status and connection speed; Amber LED indicates Ethernet activity - Power:
•Power Source Options: Power pack or Cresnet (connect only one)
•Model: PW-2420RU
•Cresnet Power Usage: 15 W (0.625 A at 24 VDC) when powered by a Cresnet power supply only
•Available Cresnet Power: 24 W (1 A at 24 VDC) when powered by the included power pack only - Environmental:
•Temperature: 41 to 113 Degrees F (5 to 45 Degrees C)
•Humidity: 10% to 90% RH (noncondensing)
•Heat Dissipation: 50 BTU/hr - Enclosure:
•Chassis: Metal, black finish
•Faceplate: Extruded metal, black finish, polycarbonate label overlay
•Mounting: Freestanding or 1 RU 19-in. rack-mountable (adhesive feet and rack ears included)
C2N-IO
- Control Port Expansion Module
CEN-GWEXER
- 2-way RF Wireless Transceiver
CEN-IO-COM-102
- Wired Ethernet Module with 2 COM Ports
CEN-IO-COM-202
- Wi-Fi Network I/O Extender with 2 COM Ports
CEN-IO-DIGIN-104
- Wired Ethernet Module with 4 Digital Inputs
CEN-IO-DIGIN-204
- Wi-Fi Network I/O Extender with 4 Digital Inputs
CEN-IO-IR-104
- Wired Ethernet Module with 4 IR Ports
CEN-IO-IR-204
- Wi-Fi Network I/O Extender with 4 IR Ports
CEN-IO-RY-104
- Wired Ethernet Module with 4 Relay Ports
CEN-IO-RY-204
- Wi-Fi Network I/O Extender with 4 Relay Ports
CEN-SW-POE-5
- 5-Port PoE Switch
CEN-SWPOE-16
- 16-Port Managed PoE Switch
CENI-GWEXER
- infiNET EX + ER Wireless Gateway, International Version
CRESTRON-APP-ANDROID
- Crestron Mobile Application for Android Devices
DIN-CENCN-2-POE
- Ethernet to Cresnet Bridge with PoE
PWE-4803RU
- PoE Injector
RMC4
- 4-Series Control System
SW-FUSION-C-3
- Crestron Fusion Cloud Monitoring and Scheduling Software
SW-FUSION-P-L
- Crestron Fusion On-Premises Monitoring and Scheduling Software
Control System
3350466 kb
- Data Sheet
Control System
274840 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Premier Group
close
Premier Group
12345 Old Meridian
Carmel, IN 46032
USA
(317) 580-1032
https://premier-group.com/
Contact in regards to this product:
Crestron Electronics, Inc.
Model: CP4
Request more information from a dealer near you
close
Request more information from a dealer near you
Premier Group is rated
5 out of
5 based on
8 reviews from around the Web.
