The DMF-CI-8 is a 2-space rack-mountable chassis designed to house up to eight Crestron® DM-NVX-C or DMCF series cards. Any of these cards may be installed in any slot.
Eight-slot card frame for Crestron® DM-NVX-C and DMCF series cards
Provides a high-density, multi-endpoint 4K video solution
Hot-swappable card serviceability
Front panel 2 inch color LCD display and status indicators
Network setup for each card through front panel
Variable-speed fan cooling
2-space 19-inch rack-mountable
Input/Output Board/Card Type - Network
Rackmountable - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
AC Voltage (Maximum):
240 Volts
AC Voltage (Minimum):
100 Volts
Active Power:
350 Watt
Current Draw:
4.30 Amps
Depth:
15.43 in
Height:
3.47 in
Width:
17.40 in
Product Weight:
9.90 lbs
Regulatory Compliance:
HDCP
COMMUNICATIONS:
•USB Host: For loading of firmware via a USB mass storage device •USB Device: Computer console for setup •RS-232: Computer console for setup
Card Slots:
•CARD SLOT ID 1 - 8: (8) Card slots •Each slot accepts (1) DM-NVX-C series encoder/decoder card or (1) DMCF series transmitter or receiver card
Connectors:
•G: (1) 6-32 screw •Chassis ground lug •100-240V~4.3-1.8A 50/60Hz: (1) IEC 60320 C14 main power inlet •Mates with removable power cord, included •CONSOLE, SERIAL (front): (1) 8-pin RJ45 female •RS-232 computer console port •CONSOLE, USB (front): (1) USB Type-B female •USB computer console port •USB (front): (1) USB Type A female •Supports USB mass storage devices for firmware update
Controls and Indicators:
•PWR: (1) Bi-color green/amber LED, indicates operating power supplied from AC line, turns amber while booting and green when operating •STATUS: (1) Bi-color green/red LED, indicates a normal (green) or critical error (red) condition •Display: (1) 2 inch (52 mm) diagonal, 220 x 176 pixels, 16-bit TFT active matrix color LCD, displays IP address settings for each installed card •Nav Pad: (1) 5-way navigation pad for menu navigation and adjustment of settings •HOME: (1) Pushbutton, enters or returns to the home menu •BACK: (1) Pushbutton, steps menu back one level •CARD SLOT STATUS, TX 1 - 8: (8) Green LEDs, each indicates the corresponding card is in transmitter mode •CARD SLOT STATUS, RX 1 - 8: (8) Green LEDs, each indicates the corresponding card is in receiver mode •CARD SLOT STATUS, OL 1 - 8: (8) Green LEDs, each indicates the corresponding card is online
The Premier team has been stellar and attentive to every single need we have had and were on site during the entire construction of our home to insure first class install and service.